EasyManua.ls Logo

Groen CONVECTION COMBO CC-E series - User Manual

Groen CONVECTION COMBO CC-E series
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT INFORMATION
IMPORTANT INFORMATION IMPORTANT INFORMATION
IMPORTANT INFORMATION KEEP FOR OPERATOR
KEEP FOR OPERATOR KEEP FOR OPERATOR
KEEP FOR OPERATOR IMPORTANT INFORMATION
IMPORTANT INFORMATION IMPORTANT INFORMATION
IMPORTANT INFORMATION
CC20-EF
CC10-E
E-CC-MOLAUNAM ROTAREPO
Part Number 121015 Rev. A DOMESTIC
MODEL: CC-E
CONVECTION COMBO™
Combination Steamer-Oven
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE
.
Information contained in this document is
known to be current and accurate at the time
of printing/creation. Unified Brands recom-
mends referencing our product line websites,
unifiedbrands.net, for the most updated
product information and specifications.

Table of Contents

Questions and Answers

  • M
    Mary JohnsonAug 12, 2025
    What to do if the Groen CONVECTION COMBO CC-E Oven maximum generator drain time has been exceeded?
    • L
      lalexanderAug 12, 2025
      If the maximum generator drain time (five minutes) has been exceeded, inspect the drain line and remove any blockage. Make certain that the drain is free-vented as detailed in the Installation Section of this Manual. (Paragraph 4, Page 6)
  • C
    Christina RobertsAug 15, 2025
    What to do if Groen CONVECTION COMBO CC-E exceeds maximum generator fill time?
    • K
      Kristen EvansAug 16, 2025
      If the Groen Oven displays a message indicating that the maximum generator fill time (90 seconds) has been exceeded, ensure the water supply is fully turned on and that hoses are not kinked or pinched. If the code is still displayed the unit will operate in the Oven Mode only. Call your Groen Service Agency
  • T
    Theodore MartinezAug 19, 2025
    How to fix the low water level probe issue in a Groen Oven?
    • S
      swilsonAug 19, 2025
      To address a low water level probe issue in your Groen Oven, try cleaning the steam generator to remove contamination from the probes. If either code continues call your Groen Service Agency. If both codes are displayed the unit will only operate in the Oven Mode. If only one code is displayed the unit will operate in all modes, but water may overflow from the generator into the cooking chamber during operations in either the Steam or Combo Modes.
  • R
    Rick Ruiz Jr.Aug 23, 2025
    What causes excessive time between fills in Groen Ovens (after 3/97)?
    • C
      cynthiamitchellAug 23, 2025
      Excessive time between fills in Groen Ovens (Units After 3/97 Only) can be caused by a leaky fill valve. The unit will operate in Oven Mode only. Call your Groen Service Agency
  • A
    April AllenAug 27, 2025
    What happens when the Groen CONVECTION COMBO CC-E air probe is faulty?
    • R
      Rebekah Hernandez PhDAug 27, 2025
      If the air probe in your Groen Oven is faulty, the unit will operate in Steamer and Clean Cycle Modes only. Call your Groen Service Agency
  • A
    Albert JohnsonAug 31, 2025
    What to do if the Groen CONVECTION COMBO CC-E generator probe is faulty?
    • B
      Bernard SmithAug 31, 2025
      If the generator probe in your Groen Oven is faulty, the unit will operate in Oven Mode only. Call your Groen Service Agency
  • M
    Maxwell Brown DDSSep 4, 2025
    What happens if the drain probe is faulty in older Groen Ovens (before 3/97)?
    • E
      Erin JohnsonSep 4, 2025
      If the drain probe is faulty in Groen Ovens manufactured before 3/97, the unit will operate in all modes. Call your Groen Service Agency
  • C
    Carl SchmidtSep 7, 2025
    What happens if older Groen Ovens (before 3/97) are out of calibration?
    • J
      Joshua MorganSep 8, 2025
      If Groen Ovens manufactured before 3/97 are out of calibration, the unit will operate in all modes. Call your Groen Service Agency

Summary

Operator Manual Overview

Model CC-E Convection Combo Details

Provides information on the specific model and its features, including the Convection Combo™ designation.

Operator Safety Warnings

General Installation and Operation Precautions

Details essential warnings and cautions for installation, operation, and maintenance to prevent injury or damage.

CC10-E Installation and Start-Up

Water and Drain Connections (CC10-E)

CC20-E Installation and Start-Up

Mounting and Electrical Connections

Water and Drain Connections (CC20-E)

Initial Start-Up Procedures

High Altitude and Temperature Settings

Fan Rotation and Mode Testing

Operation Guide

Controls and Indicators Overview

Explains the function of the control panel buttons, displays, and status lights.

Steamer Mode Operation

Step-by-step instructions for operating the unit in Steamer Mode.

Oven Mode Operation

Step-by-step instructions for operating the unit in Oven Mode.

Combo Mode Operation

Step-by-step instructions for operating the unit in Combo Mode.

Hold Mode Operation

Cleaning and Care

Suggested Cleaning Tools and Agents

Exterior Cleaning Procedures

Interior Cleaning Procedures

De-liming Only Procedure

Maintenance and Troubleshooting

Routine Maintenance and Service Messages

Troubleshooting Guide and Service Codes

Provides a guide to identify and resolve problems using service codes.

Groen CONVECTION COMBO CC-E series Specifications

General IconGeneral
BrandGroen
ModelCONVECTION COMBO CC-E series
CategoryOven
LanguageEnglish

Related product manuals