Groeneveld TWIN - User Manual

General Manual
TWIN
Automatic TWIN Greasing System
EG1701
your efficiency is our challenge

Summary

2. Description of the System

2.4 The Greasing Cycle

Explanation of the four phases of the greasing cycle.

2.3 Description of the Parts

2.3.1 Grease Pump

2.3.2 Control Unit

2.3.3 Distribution Blocks and Metering Units

2.4 The Greasing Cycle

2.4.1 Greasing Cycle A

2.4.2 Greasing Cycle B

3. Principle of Operation

3.2 Pump Unit

Explains the assembly and working of the pump unit.

3.3 Metering Units

Describes the function and operation of metering units.

3.4 Grease Pressure Switch

3.5 Control Unit

Explains how the control unit manages the greasing system.

3.5 Control Unit

3.5.2 Length of Greasing Cycles

3.5.3 Maximum Pumping Phase Length

3.5.5 Reaction to Grease Pressure Malfunctions

How the system reacts to grease pressure issues.

4. Operating Instructions

4.2 Operating Mode Push-Button

4.4 Test Push-Button

Procedures for testing the greasing system.

4.5 The GINA

Information on the GINA tester for installation and analysis.

4.4 Test Push-Button

4.4.1 Introduction

4.4.2 Single-Test Cycle

Procedure for performing a single-test cycle.

4.4.3 Continuous-Test Cycle

4.5 The GINA

4.5.1 Introduction

4.5.2 Operating Panel

Description of the GINA's display and operating panel keys.

4.5.3 Connecting and Switching on the GINA

Step-by-step guide for connecting and powering on the GINA.

5. Maintenance Instructions

5.2 Overhaul

5.3 Bleeding the System

Procedure for removing air from the greasing system lines.

5.4 Re-filling the Grease Reservoir

Instructions for refilling the grease reservoir.

5.5 Finding Malfunctions

Guidance on identifying and diagnosing system malfunctions.

5.4 Re-filling the Grease Reservoir

5.4.1 Use of the Correct Grease

Critical information on selecting and using the proper grease.

5.4.2 Refilling the Reservoir

5.5 Finding Malfunctions

5.5.2 Recognising Malfunctions

5.5.3 Malfunction Finding Table

A table listing malfunctions, causes, and solutions.

5.5.4 Malfunction Finding Procedures

Detailed procedures for diagnosing specific malfunctions.

Groeneveld TWIN Specifications

General

Brand	Groeneveld
Model	TWIN
Category	Lubrication systems
Language	English