19
Faucet cleaning (cleaning mode)
When touch operation should be disabled (e.g. for cleaning of
the faucet), the cleaning mode can be switched on. Then for 2
minutes, the touch operation is turned off. To enable the
cleaning mode, follow these steps:
• Briefly press the AQUA STOP button, then a small water flow
indicates the cleaning mode is activated.
• The light is blinks twice.
• For 2 minutes, the touch function is de-activated, and
afterwards it will automatically switch on again.
GROHE MINTA TOUCH
ARTICLE # 31359
INSTALLATION MANUAL
12.6.13
FAQ
To Previous Page
Loading...
