EasyManua.ls Logo

Gronomics MRGB-2L 48-48 User Manual

Gronomics MRGB-2L 48-48
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
East Bethel, MN USA 763-753-7374
Continued
1
Parts Identi cation
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are required,
contact Gronomics at 1-855-299-6727.
NOTE: Ground preparation is optional, however we
recommend leveling area under frame of product, or
place product directly on a flat level surface before
filling with soil.
2
1
ITEM QTY.
Parts List
1
4
R1300
2 7 R4500
3 1 R4500L
Corner Post, 4” x 4” x 13”
Side Rail, 45” x 5-1/2” x 7/8
Side Rail w/Logo, 45” x 5-1/2” x 7/8
3
Modular Raised Garden Bed
(Two Level 48” x 48” x 13”) Assembly Instruction
Item #: MRGB-2L 48-48
Stand two 4” x 4” x 13” corner posts (Item 1) upright.
Install a 45” x 5-1/2 “ side rail (Item 2) into the slots and slide
down.
Repeat procedure for the two remaining corner posts and
45” x 5-1/2 “ side rail.
Side Rail Assembly
2
2
1
1
Packaged & Inspected by: Date:
PART #
DESCRIPTION
Product Care & Maintenance - Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required for
cedar products when used outdoors, a natural oil finish applied regularly will help maintain the beauty and minimize cracking and
drying. It is recommended to use Gronomics Garden Bed Oil (Item # GBO-1Q), anon-toxic, food safe finish that is very easy to
apply. Apply Oil when air and wind temperatures are between 50-90degrees. Avoid applying in direct sunlight
Question and Answer IconNeed help?

Do you have a question about the Gronomics MRGB-2L 48-48 and is the answer not in the manual?

Gronomics MRGB-2L 48-48 Specifications

General IconGeneral
BrandGronomics
ModelMRGB-2L 48-48
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

Parts Identification and Verification

Product Care and Maintenance

Garden Bed Assembly Instructions

Side Rail Assembly

Stand two corner posts upright and install one side rail into the slots.

End Rail Assembly

Install two 45” x 5-1/2” side rails into the slots and slide down.

Final Side Rail Assembly

Install the remaining side rails, including the one with a logo, into the slots.

Related product manuals