Gronomics RGB 34-95 User Manual

AssemblyInstructionSheet 31-Oct-12
GRONOMICS
®
“TOOL FREE ASSEMBLY”
34” x 95” x 13” RAISED GARDEN BED
Parts Check List and Assembly Instructions
STEP I
A) Unpack all of the parts and organize them in ‘like’ stacks. Please read the
instructions in its entirety before beginning assembly.
You should have: Model #RGB 34-95
Model #RGB 34-95S
QUANTITY
PART DESCRIPTION
PART #
4
4” x 4” x 13” Corner Post
1300
2
4” x 4” x 13” Center Post
1302
Parts for the Sides
4
31” x 5½” x 1” Side Rail
3101
6
45” x 5½” x 1” Side Rail
4501
2
45” x 5½” x 1” Side Rail (w/Logo)
4501L
Part for the Center Support
1
31” x 2½” x 1” Narrow Support Rail
3103
Packaged & Inspected by:_______________________ Date____________________
NOTE: If you need assistance with parts or have assembly questions, please contact
Customer Service either via email at info@gronomics.com or phone at 763-753-7374.

Gronomics RGB 34-95 Specifications

General

Material	Recycled Plastic
Capacity	95 Gallons
Weight	35 lbs
Ventilation	Yes
UV Resistant	Yes

Summary

34x95x13 Raised Garden Bed Assembly

Step 1: Unpack and Organize Parts

Unpack all parts, organize them into like stacks, and read instructions before assembly.

34x95x13 Raised Garden Bed Assembly Steps

Step 2: Assemble Base Frame

Assemble the base frame using corner and center posts with side rails, including the w/logo rail.

Step 3: Connect Side Rails

Connect corner posts with 31" side rails, then add the four 45" side rails and repeat with remaining 31" rails.

Step 4: Add Center Support

Slide the narrow support rail between center posts and lift into place when filling with soil.

95x80 Raised Garden Bed Trellis Kit Assembly

Step 1: Unpack and Identify Trellis Parts

Unpack all parts for the trellis kit and organize them before beginning assembly.

Step 2: Install Trellis Posts

Slide the right, left, and center trellis posts into the Raised Garden Bed frame.

Step 3: Attach Side Rails

Slide the two 45" x 5½" x 1" side rails into the installed trellis posts.

95x80 Raised Garden Bed Trellis Net Assembly

Step 2: Weave Side Rails Through Netting

Weave the two 45" side rails through the trellis net, ensuring the double strand is on top.

Step 3: Secure Trellis Net

Stretch and secure the trellis net across the side rails, locking into the notched end.

Step 4: Fasten Lower Corners

Stretch and fasten the trellis netting on the lower corners of the Raised Garden Bed with tacks.