Gronomics RUSTIC Series - STEP II: Assembling the First Sections; STEP III: Completing the Garden Bed Structure; STEP IV: Multiple Kit Configurations

GRONOMICS
®
RUSTIC SERIES
“TOOL FREE ASSEMBLY”
Note: Ground preparation is optional; we recommend leveling
area under frame of bed before placing bed and filling with soil.
STEP II
A) Start with two 4” x 4” x 6.5” corner posts, place
the posts upside down.
B) Slide one 45” x 5½” x 1” side rail between the
two posts. (see figure 1) Repeat the same
process with the other two 4” x 4” x 6.5” corner
posts and another 45” x 5½” x 1” side rail.
STEP III
A) Connect the two corner posts by sliding a
45” x 5½” x 1” side rail into each post.
(see figure 2)
B) Slide the remaining 45” x 5½” x 1” side rail into
the posts. Make sure to place the 45” x 5½” x
1” side rail w/logo on the top, with logo facing
right side up.
STEP IV for MUTIPLE KITS
A) See box labeling for multiple configuration
options. Simply stack or expand in any
direction. Posts can be left as is for future
expansion or add a decorative cap to complete
the look.
(Figure 1)
(Figure 2)
(Figure3)
AssemblyInstructionSheet 26-Jun-15