Instructions
Pow
er On/Off
1.
Insert the power adaptor i
nto the POWERPORT on the back of the radio
and connect the other end to a power outlet. The unit will turn on and
automatically set the time.
2.
Press the POWER button to turn on the Radio.
3.
Press the SOURCE button to change between mo
des.
NOTE:
T
o return to standby mode, press the
POWER
button again
DAB/DAB+ Operation
1.
Press the SOURCE button until DAB/DAB+ mode is sele
cted.
2.
If this i
s your first use, or you've moved to a new area, press the SCAN
Button to automatically scan for local stations.
3.
To
change between stations, rotate the TUNE/SELECT dial to scroll
through the available stations. Once the preferred station has been found,
press the TUNE/SELECT button.
4.
Use the VOLU
ME dial to adjust to your desired level.
NOTE:
•
Yo
u can press the INFO button to display additional information.
•
If an alarm has been set, an alarm icon is
shown on the clock display.
Dy
na
mic Range Control {DRC)
In DAB mode:
Chan
ging th
e dynamic range can affect the loudness and quality of the radio
program that you are listening to, so that it will be more suited to your listening
conditions and your own personal listening requirements. E.g. In a noisy
environment, where quiet sounds might be difficult to hear, setting the
compression to maximum will boost he quiet sounds, whilst keeping the loudest
sounds at their original level.
There are 3 levels of compression:
DRCOff : no compression. This is the de fault setting.
DRCLow: medium compression.
DRCHigh: maximum compression.
To Next Page
Loading...
