Groov-e GV-PS753 - Changing the Scan Setting; Audio Mode

OPERATION
13
Changing the scan setting
I
n FM mode:
1. Pre
ss and hold the Menu/Info button to enter the menu options.
‘<Scan setting>’ will be displayed. Press and release the Select button.
There are now two different options to choose from and the current setting will have
an ‘*’ next to it.
• S
trong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for may
be missed using this option.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
2. P
ress the
or but
ton to select and choose from the two options available.
Press and release the Select button to confirm.
3. Press and release the Menu/Info button to exit from the Menu.
Audio mode
The Boombox will automatically switch between Stereo and Mono, depending on the
quality of the signal being received but you can override this function and manually switch
between ‘Stereo’ and ‘Mono’.
1. P
ress and hold the Menu/Info button to enter the menu options. Press the
or
button to ‘<Audio setting>’. Press and release the Select button.
T
here are now two different options of ‘Forced mono’ and ‘Stereo allowed’ and the
current setting will have an’*’ next to it.
2. Pre
ss the or button and choose from the two options available.
Press and release the Select button to confirm.
3. Pre
ss and release the Menu/Info button to exit from the Menu.