To Next PageTo Next PageWhy my Ground Zero TITANIUM does not turn on?
If your Ground Zero Amplifier doesn't turn on, verify the amplifier's power supply by checking the power wire and connections. Also, if using RCA input mode, ensure the remote wire is powered and properly connected to the head unit.
Why is my Ground Zero TITANIUM turning off at medium or high volume?
If your Ground Zero Amplifier is turning off at medium or high volume, it's important to check the speaker load impedance. Ensure that you are adhering to the recommended speaker load impedance specifications. Remember that DC resistance and AC impedance might differ when using an ohmmeter to check speaker resistance.
What to do if the Ground Zero Amplifier Status LED turned on red?
If the status LED on your Ground Zero Amplifier turns red, it could be due to the temperature protection circuit being active or shorted/damaged speaker wires. Try decreasing the head unit's volume or wait for the amplifier to cool down. Also, check the speaker wires and speakers for shorts or damage, and insulate if necessary.
Why does my Ground Zero TITANIUM Amplifier have no audible sound?
If your Ground Zero Amplifier produces no audible sound, several factors could be at play. First, check if the POW LED is green. If not, examine the amplifier's protection fuse(s), the remote wire connection (in RCA input mode), the +12 Volt power supply wire connection, and the ground wire connection. If the PRO LED is red, inspect for a speaker short or amplifier overheating.
What to do if Ground Zero TITANIUM device does not turn on?
If your Ground Zero Amplifier isn't turning on, the issue might stem from its power supply or the remote wire. Check the power wire and its connections. Also, verify the remote wire connection to the head unit, especially if you're using RCA input mode.
Why does my Ground Zero TITANIUM turn off at medium or high volume?
If your Ground Zero Amplifier shuts down at medium or high volume, the load impedance of the speakers might be the problem. Verify that each speaker's load impedance matches the amplifier's technical specifications.
What to do if there is no sound in one channel of my Ground Zero TITANIUM Amplifier?
If you're experiencing no sound in one channel of your Ground Zero Amplifier, inspect the speaker connections for short circuits or open connections. You can also reverse the left and right RCA inputs to determine if the issue originates before the amplifier.
Why is the Protection LED on in my Ground Zero TITANIUM Amplifier?
If the Protection LED on your Ground Zero Amplifier is illuminated, it could be due to a temperature shutdown or shorted speaker wires. Try turning the radio volume down. Also, separate the speaker wires and ensure they are properly insulated.
How to fix no sound in one channel of my Ground Zero Amplifier?
If you're experiencing no sound in one channel of your Ground Zero Amplifier, begin by checking the speaker leads for a short circuit or an open connection. If the speaker leads are fine, check the audio leads by reversing the left and right RCA inputs to determine if the problem is occurring before the amplifier.
What to do if my Ground Zero TITANIUM is not switching on?
If your Ground Zero Amplifier isn't turning on, the issue might be a lack of power. First, check the power wire and its connections. If that's not the problem, verify the remote wire is receiving power when the receiver is on, and inspect the connections to the radio.
General| Brand | Ground Zero |
|---|---|
| Model | TITANIUM Series |
| Category | Amplifier |
| Language | English |
Lists key features of the amplifiers.
Important precautions and notes for installation.
Guidance on selecting a location and mounting the amplifier securely.
Explains the automatic turn-on process and thermal shutdown.
Step-by-step guide to setting the amplifier's audio level.
