www.hzgrow.com
4.5.1 Single Scan Time Quickly Set Up
Infinite 3s 5s
10s 15s 20s
4.6 Time Interval For The Same Code Read
It means, after reading a barcode, refuse to read the same code for a set period of time. Only after a
set period of time, it can be able to read and output. Default: 500ms, Unit:100ms, Range:0-9900ms.
Mainly for continuous mode and automatic induction mode.
Example: Set 0.5s, first scan the bar code below. Then scan the “0” and “5” bar code in the Digital
Setting Code (Appendix 1).
Time Interval For The Same Code Read
4.6.1 Same Code Quickly Set Up
No delay Delay 1s Delay 3s
Delay 5s Delay 7s Infinite delay
To Next Page
Loading...
