Grow GM67 - Page 32

www.hzgrow.com
25
7.4.2 Hide Middle Characters
Decoding data for middle data hiding,and any starting position and length can be configured.
If the starting position of the configuration exceeds the barcode data length, the current barcode is
not hidden.
If the configured length exceeds the remaining barcode data length, all barcode data after the
start location is hidden.
*Forbid Follow
Sets the Start Location of Hide Middle Characters
Sets the start location of hide middle characters,ranging from 1 to 255.
Scan the follow barcode and then scan the digital setting code. For example, if you need to hide
data after the third character (starting with the fourth character),scan the digital setting code successively:
0 0 3.
The start bit of Hide Middle Characters
Sets the Length of Hide Middle Characters
Sets the length of hide middle characters,ranging from 1 to 255.
Scan the follow barcode and then scan the digital setting code. For example, if 16 characters need
to be hidden, then scan the digital setting code sequentially: 0, 1 and 6.
The Length of Hide Middle Characters