Growatt 4200 MTL - 4.2 Selecting the INSTALLATION location; 4.3 Fixed the mounting on the wall; 4.4 Fixed the inverter on the wall

4.3 Fixed the mounting on the wall
Inverter requires adequate cooling space. Allow at least 20cm space
above and below the inverte.
Using the mounting frame as a template, drill 4 holes as illustrated in
image.
Fix the mounting frame as the figure shows. Do not make the screws to be
flush to the wall.Instead, leave 2 to 4mm exposed
A
A
B
B
C
4.4 Fixed the inverter on the wall
Hang the inverter on the mounting frame.
Insert safety-lock screws to the bottom leg to secure the inverter.
4.5 Check Inverter Installation Status
A
B
C
D
4.2 Selecting the INSTALLATION location
The installation method and mounting location must be suitable for the
weight and dimensions of the inverter. Select a wall or solid vertical
surface that can support the PV-Inverter.
Mount on a solid surface , The mounting location must be accessible at all
times.
Vertical installation or tilted backwards by max. 15°.
The connection area must point downwards.
Do not install horizontally.
A
B
C
D
E
Check the upper straps of PV-Inverter and ensure it fits on to the bracket.
Check the secure mounting of the PV-Inverter by trying to raise it from the
bottom.The PV-Inverter should remain firmly attached.
Select the installation location so that the status display can be easily
viewed.
Choose a strong mounting wall to prevent vibrations while inverter is
operating.
6
7