To Next PageTo Next Page
Need help?Do you have a question about the Growatt SPH Series and is the answer not in the manual?
General| Type | Hybrid Inverter |
|---|---|
| Max. Input Voltage | 600V |
| Number of MPPTs | 2 |
| Protection Rating | IP65 |
| Output Power Range | 3kW - 10kW |
| Rated AC Output Power | 3-10 kW |
| Communication Interfaces | RS485, USB, Wi-Fi |
| Output Voltage | 230 V |
| Frequency | 50/60 Hz |
| Operating Temperature | -25°C to 60°C |
| Cooling Method | Natural Convection |
Introductory statement about the manual's purpose and scope.
Identifies the intended audience for the inverter installation and operation.
Overview of the Growatt SPH series inverter and its functionality.
Critical safety precautions and warnings for installation and operation.
Defines the intended applications and operational context for the SPH inverter.
Details specific safety measures and precautions to prevent hazards.
Explains the meaning of various safety symbols used on the SPH inverter.
Detailed description of the Growatt SPH series inverter models.
Interpretation of information presented on the product label.
Physical dimensions and weight specifications for the SPH inverter.
Highlights the key features and benefits of the Growatt SPH unit.
Outlines essential requirements and considerations before installing the SPH inverter.
Lists necessary tools and the RJ45 LAN line sequence for installation.
Comprehensive guide for the step-by-step installation of the SPH inverter.
Guidance on the placement and length considerations for sensor cables.
Detailed steps for physically mounting and installing the SPH inverter.
Instructions for proper grounding of the SPH inverter for safety.
Overview of the electrical connections required for the SPH system.
Procedure for connecting the PV input terminals to the inverter.
Steps for connecting AC grid and EPS output terminals.
Instructions for securely connecting the battery terminals to the inverter.
Guide for connecting the Current Transformer (CT) terminal.
Procedure for connecting the meter terminal for energy monitoring.
Steps for establishing CAN communication with lithium batteries.
Steps for establishing RS485 communication with battery BMS.
Instructions for connecting the DRMS terminal for demand response.
Guide for connecting the temperature probe for lead-acid batteries.
Procedure for connecting the dry contact for external device communication.
Final step to secure the waterproof cover after connecting cables.
Detailed steps to commission the SPH inverter after installation.
Explanation of the different operational modes available for the SPH inverter.
Describes the standard operating state and its sub-modes.
Procedures for identifying and addressing system faults.
Information on the mode used for firmware updates and programming.
Overview of the self-check process before normal operation.
Description of the inverter's state when idle but ready.
Steps required to safely power down the SPH system.
Explanation of the inverter's LCD display elements and control buttons.
Details the layout and information shown on the LCD screen.
Instructions for interpreting LED indicators and using control buttons.
Describes the sequence and content of information displayed on the LCD.
Guide on how to configure the inverter's operational work modes.
Instructions for setting the inverter's country and region for compliance.
Details specific settings for regional power grid requirements and compliance.
Step-by-step guide for configuring the country and area settings.
Instructions for verifying firmware version, region, and Power Quality Response Modes.
Introduction to the various communication ports and capabilities of the SPH inverter.
Guide on using the USB-A port for firmware updates.
Instructions for connecting and using the RS232 port for monitoring and configuration.
Information on monitoring the SPH inverter using communication interfaces.
Guidance on selecting an appropriate installation environment for optimal performance.
Essential safety precautions for handling and managing batteries.
A list of common system faults and their recommended troubleshooting steps.
Details the essential information needed when contacting technical support for faults.
Statement confirming compliance with relevant EU directives.
Outlines the terms, conditions, and scope of the manufacturer's warranty.
Specifies the conditions under which warranty claims are valid or voided.
Comprehensive technical specifications for the Growatt SPH series energy storage machines.
Technical details regarding the PV input terminal specifications.
Recommended torque values for various screws and connectors.
List of optional accessories and their part numbers for the energy storage machine.
Lists the safety standards and certifications the SPH inverter meets for different regions.
Provides contact details for technical support and service inquiries.
