Need help?Do you have a question about the Growatt SPH6000 and is the answer not in the manual?
General| Model | SPH6000 |
|---|---|
| Category | Inverter |
| Rated Power | 6000 W |
| Max. DC Voltage | 550 V |
| Max. Output Current | 27.3 A |
| Start Voltage | 150 V |
| Nominal DC Voltage | 360V |
| Number of DC Inputs | 2 |
| Number of MPP Trackers | 2 |
| Nominal AC Power | 6000 W |
| Max. AC Power | 6600 W |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion | <3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Max. Output Power | 6600 W |
| Output Voltage | 230V |
| Output Frequency | 50/60 Hz |
| Nominal AC Voltage | 230V |
| AC Voltage Range | 180V-280V |
| Power Factor | 0.8 leading - 0.8 lagging |
| Communication | RS485 |
| Cooling Method | Natural Convection |
Provides crucial safety guidelines for installation and operation.
Details safety measures for installation and operation.
Specifies essential requirements for SPH installation location and conditions.
Lists necessary tools for installation, including RJ45 terminal setup.
Details the step-by-step process for mounting the SPH unit on the wall.
Specifies requirements for PV module connection and DC input limits.
Provides safety warnings and instructions for connecting the PV array.
Explains how to connect the AC grid output and EPS output terminals.
Step-by-step guide for connecting the battery cables to the inverter.
Instructions for connecting the Current Transformer (CT) terminal.
Details the grounding point and minimum wire diameter for SPH.
Lists error messages and their corresponding suggestions for resolution.
To Next Page
