Need help?Do you have a question about the Growatt SPH 6000 BL-UP and is the answer not in the manual?
General| Rated Output Power | 6000W |
|---|---|
| Max. DC Power | 9000W |
| Nominal DC Voltage | 360V |
| Number of MPP Trackers | 2 |
| Nominal AC Power | 6000W |
| Nominal AC Voltage | 230V |
| AC Voltage Range | 180-280V |
| Nominal Grid Frequency | 50/60Hz |
| Total Harmonic Distortion (THDi) | <3% |
| AC Grid Connection Type | Single Phase |
| DC Connection Type | MC4 |
| Protection Class | IP65 |
| Topology | Transformerless |
| Operating Temperature Range | -25°C to +60°C |
| Max. PV Input Power | 9000W |
| AC Output Voltage | 230V |
| AC Output Frequency | 50/60 Hz |
| Relative Humidity | 0-100% |
| Communication | RS485, Wi-Fi |
Covers DC connection requirements and PV array input.
Steps for initial setup and verification of the SPH inverter.
Provides step-by-step instructions for starting up the SPH inverter.
Lists common error messages and their suggested solutions for troubleshooting.
To Next Page