To Next PageTo Next Page
Need help?Do you have a question about the Growatt SPH3600 and is the answer not in the manual?
General| Model | SPH3600 |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3600 W |
| Max PV Input Voltage | 550 V |
| Number of MPPTs | 2 |
| Max Input Current per MPPT | 11 A |
| Nominal DC Voltage | 360 V |
| Nominal AC Power | 3600 W |
| Max AC Current | 16 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| Max Efficiency | 97.5% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Battery Voltage Range | 42 V - 59 V |
| Communication Interfaces | RS485, WiFi |
| Max AC Power | 3600W |
| Euro Efficiency | 97.0% |
| Operating Temperature Range | -25°C to +60°C |
| Cooling | Natural Convection |
Lists crucial safety guidelines to follow during installation and operation.
Details essential safety measures to prevent electrical shock and burns.
Explains the meaning of warning symbols and indicators on the SPH inverter.
Lists the fundamental prerequisites for installing the SPH inverter.
Provides step-by-step instructions for installing the SPH inverter.
Detailed steps for mounting and installing the SPH inverter on a wall.
Explains the various methods for connecting the SPH system components.
Step-by-step guide for connecting the PV input terminals using MC4 connectors.
Instructions for connecting AC output and off-grid terminals.
Details the procedure for connecting the battery terminals to the inverter.
Details the grounding connection requirements for the SPH inverter and PV array.
Outlines the procedure for commissioning the SPH inverter after installation.
Describes how the system handles and displays fault information.
Provides the procedure for safely shutting down the SPH inverter.
Guides users on how to set up and configure the inverter's work modes.
Provides steps for safely starting up the SPH inverter.
Lists common error messages and their corresponding troubleshooting steps.
