Do you have a question about the Growatt SPH4000 and is the answer not in the manual?
Model | SPH4000 |
---|---|
Category | Inverter |
Rated Power | 4000 W |
Max. DC Voltage | 550 V |
MPPT Voltage Range | 120 V - 500 V |
Number of MPPTs | 2 |
AC Output Voltage | 230 V |
Frequency | 50/60Hz |
Efficiency | 97.5% |
Start Voltage | 150 V |
Nominal DC Voltage | 360V |
Max. Input Current per MPPT | 11 A |
AC Nominal Power | 4000 W |
Max. AC Apparent Power | 4000 VA |
AC Voltage Range | 180 V - 280 V |
Power Factor | 0.8 leading to 0.8 lagging |
THDi | <3% |
AC Connection Type | Single phase |
Max. Charge/Discharge Power | 4000 W |
Nominal Battery Voltage | 48 V |
Communication with BMS | CAN/RS485 |
Operating Temperature Range | -25°C to +60°C |
Protection Degree | IP65 |
Topology | Transformerless |
Weight | 25 kg |
Max. PV Input Voltage | 550 V |
Cooling Method | Natural Convection |
Essential safety instructions, purpose of use, and safety measures/symbols.
Explains the intended application of the SPH inverter and its system diagram.
Details on high voltage, hot surface risks, radiation, and the importance of grounding.
Detailed technical specifications for the Growatt SPH series energy storage machine.
Essential prerequisites for installing the SPH inverter.
Diagrams and requirements for SPH installation, including space and ambient conditions.
Guidelines for SPH installation space, positioning, and avoiding interference.
Step-by-step guide for mounting and installing the SPH inverter on the wall.
Detailed steps for connecting the PV panels to the SPH inverter using MC4 terminals.
Information on PV connection, including voltage, current, power limits, and cable recommendations.
Step-by-step guide for connecting AC output terminals and off-grid terminals.
Critical notices regarding AC and off-grid terminal connections to prevent damage.
Detailed explanation of system fault messages and troubleshooting steps.
List of error codes, their descriptions, and suggested solutions.
Technical specifications for Growatt SPH series energy storage machines.
Detailed specifications for various SPH models, including THDI, AC connection, and battery data.
Specifications by model, including BAT connection, display, interfaces, and certifications.