Growatt SPH6000 Quick Installation Guide

Voltage
input
Rated voltage
3×220/400V
Reference frequency
50Hz/60Hz
Power consumption
<2W
Current
input
Input current
0.5-10(100)A
Starting current
0.004Ib
Power consumption
<1VA (maximum current)
Pulse
Pulse width
200/100/60ms
Pulse constant
400imp/kWh
Communi-
cation
Interface
RS485(A+, B-)
Protocol
MODBUS, DL/T 645-2007
Overall
dimension
L×W×H
100mm×72mm×66mm
Maximum onnecting
capacity
Flexible cable
Flexible cable
16mm^2
Temperature range
Working
temperature
-25℃~55℃
Storage
temperature
-40℃~70℃
- 3 0 ℃ ~ 7 0 ℃
Humidity
≤90%(no condensation)
Altitude
<2000m
Buttonicon
Button function
Selects the Voltage and Current display screens
In Set-up Mode, this is the “Left” or “Back” button.
Select the Frequency and Power factor display
screens
In Set-up Mode, this is the “Up” button
Select the Power display screens
In Set-up Mode, this is the “Down” button.
Select the Energy display screens
In Set-up mode, this is the “Enter” or “Right” button

Growatt SPH6000 Specifications

General

Model	SPH6000
Category	Inverter
Rated Power	6000 W
Max. DC Voltage	550 V
Max. Output Current	27.3 A
Start Voltage	150 V
Nominal DC Voltage	360V
Number of DC Inputs	2
Number of MPP Trackers	2
Nominal AC Power	6000 W
Max. AC Power	6600 W
Nominal Grid Frequency	50 Hz / 60 Hz
Total Harmonic Distortion	<3%
DC Switch	Yes
Protection Class	IP65
Operating Temperature Range	-25°C to +60°C
Max. Output Power	6600 W
Output Voltage	230V
Output Frequency	50/60 Hz
Nominal AC Voltage	230V
AC Voltage Range	180V-280V
Power Factor	0.8 leading - 0.8 lagging
Communication	RS485
Cooling Method	Natural Convection