Country/Regulation Name
options
VDE0126-1-1
Germany
UK_G83
Italy
France
Denmark
Belgium
Spain
Greece
Turkey
Hungary
// 0
// 1
// 2
// 3
// 4
// 5
// 6
// 7
// 8
// 9
// 10
Note: If the country you want to select is not in the above list, please directly select
VDE0126-1-1.
Please finish the country selecting according to the following steps:
The LCD will quickly switch to and stay at the ‘Please select’ interface
after power on, as Fig 5-5-1.
A
Single knock on the LCD, countries will vary from one to another along
the above list order. Fig 5-5-2 acts as an example, and Germany is the
second selection.
B
Fig 5-5-1
Fig 5-5-2
When you need to select any of these countries, you can Double knock to
enter the next interface. Here we select Italy as an example, as Fig 5-5-3.
C
Fig 5-5-3
When the country arrives at Italy, Double knock to enter the two options
‘YES’ and ‘NO’, and the cursor stays at ‘NO’ in default, as Fig 5-5-4.
D
Fig 5-5-4
E
Fig 5-5-5
Single knock to select ‘YES’, as Fig 5-5-5.
F
Double knock to confirm your selection, LCD will display ‘Select OK’ with
the country name in the below, as Fig 5-5-6.
Note: if you still single knock at the interface as Fig 5-5-5, the cursor will
go to ‘NO’ again as Fig 5-5-4, then if you double knock, the display will
switch to the interface as Fig 5-5-3.
Fig 5-5-6
12 13
To Next Page
Loading...
