What does Error 101 mean on a Growatt 5000MTL -S Inverter, and how can I fix it?
Error 101 on a Growatt Inverter indicates a communication fault where the Slave processor can't receive data from the Master processor. Restart the inverter. If the error message still exists, contact Growatt.
What does 'Residual I High' mean on Growatt 5000MTL -S Inverter?
The 'Residual I High' error on your Growatt Inverter indicates that the leakage current is too high. Restart the inverter. If the error message still exists, contact Growatt.
Crucial safety guidelines and warnings for installation and operation.
Crucial safety guidelines for installation.
Essential safety precautions for electrical work.
Diagnosing fault codes and potential solutions.
General| Model | 5000MTL-S |
|---|---|
| Rated Power | 5000 W |
| Max. PV Input Power | 6000 W |
| Nominal DC Voltage | 360 V |
| Number of MPPT | 2 |
| Number of MPP Trackers | 2 |
| Max DC Input Current | 11 A |
| Max. Input Current per MPPT | 11 A |
| Nominal AC Power | 5000 W |
| Max. AC Power | 5500 W |
| Max. AC Current | 22.7A |
| AC Voltage Range | 180-280V |
| Nominal Grid Frequency | 50/60Hz |
| AC Output Frequency | 50 / 60 Hz |
| Power Factor | >0.99 |
| THDi | <3% |
| Peak Efficiency | 98.4% |
| DC Connection Type | MC4 |
| AC Connection Type | Terminal Block |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural Cooling |
| Weight | 12.8 kg |
| AC Output Voltage | 230V |
| Protection Level | II |
| Operating Temperature Range | -25°C to 60°C |
| Operating Temperature | -25°C to 60°C |
| Cooling | Natural |
To Next Page
