编号：GR-UM-C -00
25 / 57
7.1.1.3 Server WEB Page Set Communication Address
Refer to Section 8.1.2 to log in to the server. After obtaining the inverter data through the collector, modify the device
communication address. This operation is performed by a professional.
1> Click "Settings" in "device list" to enter the advanced settings page;
2> Read the "30" register to get the current device address, the password is max + today date (such as August 7th:
max20190807);
3> When setting a new communication address, write the value of the "30" register as the address to be set (1~254), and
then click "Save";
4> After setting the communication address, you can read the value of the "30" register to confirm whether the setting is
successful.
To Next Page
Loading...
