编号:GR-UM-C -00
6 / 57
After you receiving the inverter please check the packing materials for damage, if there is any
damage please contact your supplier.
The Max. PV input voltage should not exceed 1100V.
For the disposed inverter, the consumer should dispose it according to local disposal rules for
electrical equipment waste.
2.2 Symbol Conventions
Indicates an imminently hazardous situation which, if not avoided, will result in serious injury or death.
Indicates potentially hazardous situation which, if not avoided, will result in serious injury or death.
Indicates potentially hazardous situation which if not avoided, will result in minor or moderate injury.
Indicates certain hazardous situation which, if not avoided, will result in property damage.
Reminds operator to read installation manual before operating or installing inverter.
2.3 Label Description
High Voltage Electric
Shock
Inverter operating with high voltage, any operation regarding inverter need
to be done by trained and authorized electrical technician.
Do not touch a running inverter cause it generates high temperature on the
case.
Connect inverter to grounding bar.
Residual voltage exists after the inverter is powered off, it takes 5 minutes
for the inverter to discharge to the safe voltage