Growatt MIN 10000TL-X - 7 Commissioning Procedures

39
7 Commissioning
DANGER
Do not disconnect the DC connectors under load.
WARNING
Improper operation during the wiring process can cause fatal injury to
operator or unrecoverable damage to the inverter. Only qualified
personnel can perform the wiring work.
CAUTION
Damage to the inverter due to moisture and dust penetration
 Make sure the cable gland has been tightened firmly.
 If the cable gland are not mounted properly, the inverter can be
destroyed due to moisture and dust penetration. All the warranty
claim will be invalid.
Requirements：
 The AC cable is correctly connected.
 The DC cable is correctly connected.
 The communication cable is correctly connected.
 The country is set correctly.
7.1 Start the inverter
7.1.1 Touch control
Touch
Description
Single touch
Switch display or Number
+1
Double touch
Enter
Three touch
Previous menu
Hold 5s
Confirm country setting or
Number recover defaut
value