Page 39/43
Non-observance of Growatt installation and maintenance instruction;
Failure to observe the applicable safety regulations
Power failure surges, lighting, flood, fire, exposure to incorrect use, negligence, accident, force majeure,
explosion, terrorist act, vandalism or damage caused by incorrect installation, modification or extreme
weather conditions or other circumstances not reasonably attributable to Growatt.
The warranty shall also cease to apply if the product cannot be correctly identified as the product of Growatt.
Warranty claims will not be honored if the type of serial number on the machines have been altered, removed or
rendered illegible.
Liability
The liability of Growatt in respect of any defects in its machines shall be limited to compliance with the obligations
as stated in these terms and conditions of warranty. Maximum liability shall be limited to the sale price of the
product. Growatt shall accept no liability for loss of profit, resultant of indirect damage, any loss of electrical power
and / or compensation of energy suppliers within the express meaning of that term.
The warranty rights as meant herein are not transferable or assignable to any third party excepting the named
warranty holder.
Warranty Conditions
If a device becomes defective during the agreed Growatt factory warranty period and provided that it will not be
impossible or unreasonable, the device will be, as selected by Growatt:
1、 Shipped to a Growatt service center for repair;
2、 Repaired on-site;
3、 Exchanged for a replacement device of equivalent value according to model and age.
The warranty shall not cover transportation costs in connection with the return of defective modules. The cost of
the installation or reinstallation of the modules shall also be expressly excluded as are all other related logistical
and process costs incurred by all parties in relation to this warranty claim.
11 Decommissioning
11.1 Dismantling the energy storage
1. Disconnect the storage machine such as mentioned in section 7。
2. Disconnect the upper cable of the storage machine
watch out the SP’s shell heat and prevent to scald
wait 20 minutes until the SP cooling and then to disassembly!
3. Unscrew all the connecting cable
4. Unscrew the radiator and wall-mounted’s anchor screw and then take down the machine from wall
To Next Page
Loading...
Need help?
General
