GrowlerWerks uKeg Nitro - uKeg Setup and Operation Basics; Nitro Gas Cartridge Installation; Adjusting Pressure and Pouring; Tap Handle Operation

3
UKEG NITRO BASICS
Install Cartridge
• Before filling.
• Ensure dial is in off
position.
Charge Cap
• Tighten sleeve quickly
and firmly.
• Sleeve does not need
to bottom out.
• A quick puff of gas is
normal.
1 . 2 .
OTHER TIPS:
• Turn on pressure right away after filling.
• After dispensing, use remaining gas to flush uKeg.
• For best performance, we recommended GrowlerWerks
brand Nitro Gas.
e Cap
The dial controls the
pressure inside the uKeg
Nitro.
• Turn to “Infuse” for nitro
infusion.
• Turn to “Pour” for best
best performance
while pouring and
storing.
e Tap
• Fold tap handle back
to lock.
• Pull forward to pour.
• ENJOY!
INSTALLING THE NITRO GAS CARTIDGE
ADJUSTING PRESSURE LOCKING TAP