To Next PageTo Next Page
Need help?Do you have a question about the GRS GraverSmith 004-895 and is the answer not in the manual?
Essential steps to follow before connecting the machine to power.
Specifies the need for clean, dry, oil-free compressed air.
States that oil contamination is not covered under warranty.
Details the machine's ability for rapid cutting and carving in various materials.
Illustrates and lists the main parts of the GraverSmith machine.
Instructions for connecting the compressed air source, pressure, and flow.
Steps for connecting the air hoses and the foot throttle to the machine.
Guidance on connecting the 24 Volt converter and power supply.
Explanation of SPM settings and their effect on operation.
Procedure to adjust air pressure and SPM for best results.
Techniques for holding the handpiece for optimal control and power.
How to use the foot throttle for precise power control.
Instructions for cleaning the handpiece to maintain performance.
Maintenance advice for the foot throttle and air system components.
Details on the rotary valve's lubrication and operation.
Guide to inserting and modifying gravers/tools for the handpiece chuck.
Techniques and resources for sharpening graver points effectively.
Explains how the graver heel affects cutting angle, depth, and clearance.
Methods for practicing to gain proficiency with the machine and foot throttle.
Importance of firm workholding for effective cutting and tool life.
Simple exercises for developing cutting skills and control.
Details the 2-year warranty for the GraverSmith and handpieces.
Clarifies that damage from contaminated air is not covered by warranty.
General| Dimensions | 8" W x 5" D x 4 1/2" H (203 x 127 x 114 mm) |
|---|---|
| Weight | 6.8 lbs (3.1 kg) |
| Frequency | 50/60 Hz |
| Speed | 400 - 8, 000 strokes per minute |
| Power Supply | 110V/220V |
