Grundfos CRN 16 B - Service Tools; Special Tools; Standard Tools; Torque Tools

22.10.2002
GB
Page 5 of 12
3. Service tools
The following drawings and tables show special, standard and torque tools for pump service.
3.1 Special tools
3.2 Standard tools
3.3 Torque tools
TM00 2462 1193
Pos. Description For pos. Suppl. information Part no.
A Shaft holder for dismantling SV0287
B Punch for removing the shaft 51 SV0286
C Shaft holder for assembly SV0040
D Puller for neck ring 45 SV0239
E
Punch for removing the pump
head cover
77 SV0252
Pos. Description For pos. Suppl. information Part no.
F Ring/open-end spanner
28.a M8 - 13 mm SV0055
28-28.a-67 M12 - 19 mm SV0054
18-28-36-36.a 24 mm SV0122
G Tee key 9
M8 - 6 mm SV0050
M10 - 8 mm SV0051
H Hexagon socket head screw key 127-134 M16 - 14 mm SV0393
Pos. Description For pos. Suppl. information Part no.
I Torque wrench H-I-J
4-20 Nm 9 x 12 SV0292
20-100 Nm 9 x 12 SV0269
40-200 Nm 14 x 18 SV0400
J Ring spanner
28.a-I M8 - 13 mm 9 x 12 SV0294
28-28.a-67-I M12 - 19 mm 9 x 12 SV0271
28-36-36.a-I M16 - 24 mm 14 x 18 SV0524
K
Socket driver for hexagon socket
head screws
9-I-L
M8 - 6 mm ½” x ½” SV0297
M10 - 8 mm ½” x ½” SV0298
127-134 M16 - 14 mm ½” x ½” SV0394
L Ratchet insert tool I-K 9 x 12 -> ½” x ½” SV0295
M Extension bar L-137-134 ½” x ½” x 10 SV0395