Appendix
30
5. Parts list and sectional drawing
Fig. 1 Packed type cross sectional drawing
TM06 0979 1314
Item No. Description Item No. Description
1A, 1B, 41, 43 Upper and lower casings 31 Inboard bearing housing
2 Impeller 32 Impeller key
6 Shaft 33 Outboard bearing housing
7 Casing ring 35 In-board bearing housing cover
8 Impeller ring (optional) 37 Outboard bearing housing cover
13 Packing ring 40A In-board deflector
14, 14A Shaft sleeve
RH
LH
40B Out-board deflector
14B Shaft sleeve O-ring 46 Coupling key
16 In-board ball bearing 47 In-board bearing cover seal
17 Packing gland 63 Stuffing box bushing
17A Gland clip (when used) 73A Casing gasket (nNot shown)
17B Gland bolt 73B Bearing cover gasket
18 Outboard ball bearing 123 Bearing end cover
18A Bearing lock washer 127 Water seal piping
29 Lantern ring (optional) 169 Bearing housing seal
- Casing hardware
To Next Page
Loading...