Appendix
31
Fig. 2 Packed type with double row thrust bearing cross sectional drawing
Subject to alterations.
TM06 0980 1314
Item No. Description Item No. Description
1A, 1B, 41, 43 Upper and lower casings 31 Inboard bearing housing
2 Impeller 32 Impeller key
6 Shaft 33 Out-board bearing housing
7 Casing ring 35 In-board bearing housing cover
8 Impeller ring (optional) 37 Out-board bearing housing cover
13 Packing ring 40A In-board deflector
14, 14A Shaft sleeve
RH
LH
40B Out-board deflector
14B Shaft sleeve O-ring 46 Coupling key
16 Inboard ball bearing 47 In-board bearing cover seal
17 Packing gland 63 Stuffing box bushing
17A Gland clip (when used) 73A Casing gasket (not shown)
17B Gland bolt 73B Bearing cover gasket
18 Outboard ball bearing 123 Bearing end cover
18A Bearing lock washer 127 Water seal piping
22 Bearing lock nut 169 Bearing housing seal
29 Lantern ring (optional) - Casing hardware
To Next Page
Loading...