Need help?Do you have a question about the Grundfos JP 3-42 and is the answer not in the manual?
General| Max Head | 42 m |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Outlet Size | 1 inch |
| Inlet Size | 1 inch |
| Max Flow Rate | 3.6 m³/h |
| Maximum Operating Pressure | 6 bar |
| Enclosure Class | IP 44 |
| Insulation Class | F |
| Pump Housing Material | Stainless steel |
| Impeller Material | Noryl |
| Rated Voltage | 230 V |
| Approvals | CE |
| Weight | 10.5 kg |
Warnings about potential dangers during operation or installation.
Identifies the intended users for these instructions.
Steps to verify the product upon delivery and check specifications.
Guidelines for site selection, mounting, and physical installation of the pump.
Guidance on connecting pipes, system pressure, and pipe sizing.
Procedures for connecting pumps via plugs, fixed wiring, or external switches.
Electrical connection details and wiring diagram for pumps without cables.
How to adjust the pressure switch for desired start/stop points.
Instructions for filling the pump with water and initiating its operation.
Descriptions of the JP pump and JP Booster systems.
Specifies correct applications, limitations, and suitable liquid types.
Explanation of data found on the product's nameplate.
Procedures for checking and adjusting the tank's precharge pressure.
Steps for draining, storing, and protecting the pump from frost.
Troubleshooting steps for pump not starting, stopping unexpectedly, or low delivery.
Interpreting indicator lights and troubleshooting common issues for pressure manager models.
Troubleshooting issues related to pressure tanks and pressure switches.
Key operational parameters, head, and flow rate specifications.
Maximum inlet pressure limits and environmentally sound disposal procedures.
To Next Page
