Need help?Do you have a question about the Grundfos JP PS Series and is the answer not in the manual?
General| Brand | Grundfos |
|---|---|
| Model | JP PS Series |
| Category | Water Pump |
| Language | English |
Identifies intended users for installation and operating instructions.
Explains hazard symbols and statements used in the manual.
Steps to check the product upon delivery for correctness and specifications.
Lists the items included in the product package.
Guidance on selecting a suitable installation location for the pump.
Instructions for physically mounting the pump onto a foundation.
Guidance on connecting inlet and outlet pipes, including pipe sizing and valves.
Illustrates a typical installation for drawing water from a tank.
Shows an outdoor installation example for drawing water from a well.
Explains the built-in motor protection against overload and overheating.
Details how to connect the pump to the power supply.
Guide to checking existing wiring voltage before connecting the pump.
Step-by-step guide to priming the pump before initial startup.
Provides a visual and descriptive overview of the JP PS pump.
Specifies the types of liquids suitable and not suitable for pumping.
Explains the information found on the product's nameplate.
Describes how to interpret the product's type designation.
Information on routine maintenance procedures for the product.
Where to find information about available service kits.
Instructions on how to drain the pump for storage or maintenance.
Recommendations for storing the product safely.
Guidance on protecting the pump from frost damage when not in use.
Addresses issues where the motor fails to start or make noise.
Troubleshoots the motor not starting but producing noise.
Diagnoses and resolves issues with the motor turning slowly.
Solves the problem of the motor not stopping after water demand ends.
Diagnoses why the pump is not delivering any water.
Addresses issues related to the pump failing to prime.
Lists maximum system pressure, suction lift, and temperature limits.
Provides maximum head and flow rate specifications for different models.
Details the maximum allowable inlet pressure for various models.
Includes other relevant data like cut-in pressure and storage temperature.
To Next Page