Need help?Do you have a question about the Grundfos JP Series and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Applications | pressure boosting |
| Pump Type | centrifugal pump |
| Installation | Horizontal |
| Horsepower | 0.5 HP |
| Phase | Single-phase |
| Discharge Size | 1 inch |
Defines intended users for installation and operation.
Details safety symbols and warnings for potential risks.
Explains various symbols used in the manual for guidance.
Steps to check the product upon delivery for correctness and completeness.
Lists the items included in the package for JP and JP Booster.
Guidance on choosing a suitable installation site and ambient conditions.
Procedures for physically mounting and securing the pump.
Specific instructions for positioning and fastening the pump securely.
Guidelines for properly connecting inlet and outlet pipes to the pump.
Considerations for the system's pressure capacity relative to the pump.
Instructions for safely connecting the pump to the power supply.
Specific steps for connecting pumps that come with a power plug.
Procedures for connecting pumps that require direct wiring.
Visual representation of electrical connections for the pump.
Information on the pump's built-in protection against overload.
Steps to fill the pump with water before initial startup.
How to safely start the pump after installation and priming.
Details about the initial operational period for the shaft seal.
Detailed description and features of the JP pump.
Detailed description and features of JP Booster models.
Specifies the appropriate applications and usage for the product.
Specific intended use for the AISI 316 variant.
Information on suitable and unsuitable liquids for pumping.
Explains how to read and interpret the product's nameplate.
Decodes the model designation and specifications of the pump.
General guidelines and warnings for servicing the product.
Procedures for routine cleaning and upkeep.
Specific instructions for checking and maintaining the pressure tank.
Steps to remove water from the pump and tank.
Guidelines for storing the product when not in use.
Measures to prevent damage from freezing temperatures.
Overview of troubleshooting common product issues.
Troubleshooting steps for when the pump fails to start.
Diagnosing issues causing the pump to stop and restart.
Identifying causes for reduced water output or pressure.
Troubleshooting specific issues with pressure manager models.
Troubleshooting specific issues with pressure tank models.
Addressing problems with the booster starting and stopping too often.
Specifications for system pressure, suction lift, and temperatures.
Performance data including maximum head and flow rates.
Maximum allowable pressure on the pump's inlet side.
Other technical details like cut-in pressure and storage temperature.
Guidelines for environmentally sound disposal of the product.
To Next Page
