Grundfos MGE 112 Series User Manual

English (GB)
23
9.3.3 Menu overview for advanced control panel
1)
Only available if an advanced functional module, type FM 300, is fitted.
Advanced control panel
"Home" MGE Multimotor system
●●
"Status" MGE Multimotor system
""Operating status"" ●●
""Operating mode, from"" ●●
""Control mode"" ●●
""Pump performance"" ●●
""Actual controlled value"" ●●
""Resulting setpoint"" ●●
""Speed"" ●●
""Acc. flow and specific energy"" ●●
""Power and energy consumption"" ●●
""Measured values"" ●●
""Analog input 1"" ●●
""Analog input 2"" ●●
""Analog input 3""
1)
●●
""Pt100/1000 input 1""
1)
●●
""Pt100/1000 input 2""
1)
●●
""Analog output""
1)
●●
""Warning and alarm"" ●●
""Actual warning or alarm"" ●●
""Warning log"" ●●
""Alarm log"" ●●
""Operating log"" ●●
""Operating hours"" ●●
""Fitted modules"" ●●
""Date and time"" ●●
""Product identification"" ●●
""Motor bearing monitoring"" ●●
""Multi-pump system"" ●
""System operating status"" ●
""System performance"" ●
""System input power and energy"" ●
""Pump 1, multi-pump system"" ●
""Pump 2, multi-pump system"" ●
""Pump 3, multi-pump system"" ●
""Pump 4, multi-pump system"" ●

Grundfos MGE 112 Series Specifications

General

Brand	Grundfos
Model	MGE 112 Series
Category	Engine
Language	English