Declaration of conformity
86
– Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009
– ATEX Directive (2014/34/EU) (applies only to products with ATEX
mark on the nameplate).
Standards used: EN ISO 80079-36:2016, EN ISO 80079-37:2016
Non-electrical self-declaration made by Grundfos according to the
above listed standards is retained by Dekra Certification B.V. No
0344, 6802 ED Arnhem, The Netherlands, under reference
number: 203104000-0424
– RoHS Directives: 2011/65/EU and 2015/863/EU
Standard used: EN IEC 63000:2018
This EC/EU declaration of conformity is only valid when published as
part of the Grundfos installation and operating instructions
(96551018).
Bjerringbro, 5 February 2021
Jimm Feldborg
Head of PD IND
GRUNDFOS Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile the technical file and
empowered to sign the EC/EU declaration of conformity
To Next Page
Loading...
