Need help?Do you have a question about the Grundfos UP15-42F and is the answer not in the manual?
General| Model | UP15-42F |
|---|---|
| Category | Water Pump |
| Max Flow Rate | 1.5 m³/h |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum ambient temperature | 40 °C |
| Enclosure class | IP44 |
| Approvals | CE |
| Pump housing material | Cast Iron |
| Phase | 1 |
| Housing Material | Cast Iron |
| Pump Type | Circulator |
Specifies maximum fluid temperature, ambient conditions, and working pressure for the UP15-42F/VS model.
Lists operational limits including maximum fluid temperature, ambient conditions, and pressure for UP26 models.
Details recommended and prohibited orientations for pump and terminal box installation.
Step-by-step guide for rotating the control box on the pump.
Guidance on control signal wiring, including current/voltage connections and testing procedures.
Explanation of dip switch settings for minimum speed and control signal selection.
Details the operation of the Offset Dial and Manual % Dial for fine-tuning pump speed.
Describes the function of the Power ON and % Out indicator LEDs.
Provides ratings for voltage and current speed control signal connections.
Summary table of dip switch positions and their corresponding settings.
To Next Page
