Grundfos UPE 2000 Series - Constant-Pressure Control; Proportional-Pressure Control; Setting of Pump Head

137
7.2.2 Setting of pump head
The desired pump head is set by pressing the button
"+" or "–".
The light fields on the control panel will indicate the
head set.
The table below shows examples of pump head set-
tings indicated by the light fields.
Constant-pressure control Proportional-pressure control
UPED 100-60
Fig. 14
TM00 4435 1597
Fig. 15
TM00 4434 1597
Light field 5 is activated, indicat-
ing a desired head of 3 metres.
Light fields 5 and 6 are acti-
vated, indicating a desired head
of 3 metres at maximum flow.
UPED 50-120
UPED 65-120
UPED 80-120
Fig. 16
TM00 4433 1597
Fig. 17
TM00 4432 2297
Light fields 5 and 6 are acti-
vated, indicating a desired head
of 5.5 metres.
Light fields 7 and 8 are acti-
vated, indicating a desired head
of 6 metres at maximum flow.
mH
QQ
0
1
2
3
4
5
mH
0
1
2
3
4
5
QQ
H m
QQ
0
2
4
6
8
10
1
H m
QQ
0
2
4
6
8
10