10
ENGLISH
OPERATION _______________________________
3 Your body weight will be flashing on the LCD
display
B
.
– Wait until the indication of your weight
stops flashing.
4 After about 10 seconds the scale switches off
automatically.
Notes
■ The appliance has a self calibration facil-
ity. After every energizing, it performs self
calibration which may cause to measure your
weight inaccurately at your first 2 measure-
ments.
■ If the batteries are low on charge, ”LO”
appears on the LCD display
B
. Replace the
batteries with the new ones.
INFORMATION ____________________________
Cleaning and care
Warning
■ Make sure to follow the safety instructions
carefully during cleaning.
1 Wait until the appliance turns off automati-
cally.
2 Use a damp soft cloth to clean the exterior of
the appliance.
Caution
■ Never use cleaning agents, alcohol, acetone,
petrol, solvents or abrasive cleaners, metal
objects, metal polish or hard brushes to clean
the appliance.
■ Never put the appliance in water or any other
liquid.
Note
■ Dry all parts carefully with a soft towel after
cleaning the appliance.
■ The maximum load of the scale is180 kg. If
this is exceeded, “Err” appears on the LCD
display
B
. Step down from the glass surface
immediately.
■ If the LCD display shows a malfunction, reset
the scale. Remove the batteries, wait for 10
seconds and then insert them again.
■ The scale is equipped with an automatic off
function to preserve the battery. It switches
off automatically after 10 seconds once the
measurement is complete.
To Next Page
Loading...
Need help?
General
