Why is my Grundig LCD TV remote control not working?
If your Grundig LCD TV remote control isn't working, there might be a few reasons. First, ensure there's nothing blocking the path between the remote and the TV; point the remote directly at the television. Second, check the batteries and replace them if needed. Finally, try switching off the television at the mains switch for two minutes to reset the operating mode.
What to do if my Grundig LCD TV has a picture but no sound?
If your Grundig LCD TV shows a picture but has no sound, the volume might be set too low. Try turning up the volume or switching it on.
How to fix insufficient contrast in my Grundig 32 VLD 4201 BF picture?
To fix insufficient contrast in your Grundig LCD TV picture, first adjust the brightness, contrast, or color settings. If that doesn't work, the problem might be with the broadcast; try switching to another channel.
What to do if my Grundig 32 VLD 4201 BF screen is lit but no station is visible?
If your Grundig LCD TV screen is lit but no station is visible, check if the antenna cable is connected properly. If it is, try starting a channel scan to tune in available channels.
Why is there no color on my Grundig 32 VLD 4201 BF LCD TV?
If there is no color on your Grundig LCD TV, try these steps: 1. Turn up the color intensity, as it may be set too low. 2. If the option is available, adjust the TV standard to select the correct color standard. 3. Try a different channel, as the problem might be with the current station.
What causes ghosting or reflection on my Grundig LCD TV and how to fix it?
Ghosting or reflections on your Grundig LCD TV can be due to the channel setting or antenna issues. Try automatic or manual tuning/fine tuning. Also, have your antenna cable or system checked.
What to do if my Grundig 32 VLD 4201 BF teletext is impaired or absent?
If the teletext on your Grundig LCD TV is impaired or absent: * The issue might be with the station, so try a different channel. * It could be a problem with the television channel (no teletext) or antenna system, so try a different TV channel and carry out fine tuning. * The station signal might be too weak, so check your antenna.
Why are picture and/or sound distorted on my Grundig LCD TV?
Distorted picture and/or sound on your Grundig LCD TV can be caused by interference from other devices. Try placing the device in a different position.
How to fix a too dark picture in PC mode on my Grundig 32 VLD 4201 BF LCD TV?
If the picture is too dark in PC mode on your Grundig LCD TV, the picture resolution and picture frequency on the PC may be set incorrectly. Change the settings on the PC (e.g., to 1280 x 768 resolution with a refresh rate of 60 Hz).
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LCD |
| Resolution | 1366 x 768 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Tuner | DVB-T2/C/S2 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 50 Hz |
| Built-in Wi-Fi | No |
| Smart TV | No |
| Energy Efficiency Class | A+ |
| Weight | 5.5 kg |
To Next Page