What to do if Grundig 32 VLE 7321 WL remote control does not work?
If the Grundig LCD TV remote control isn't working, first make sure there's nothing blocking the remote's signal to the TV. Point the remote directly at the television. Then, check the batteries and replace them if needed. As a last resort, try turning off the television at the mains switch for two minutes and then turning it back on.
Why does my Grundig 32 VLE 7321 WL show snow but no channels?
If your Grundig LCD TV screen shows static but no channels, try these steps: * Ensure the antenna cable is securely connected. * Perform a channel scan to tune in available stations. * Adjust the brightness, contrast, and color settings to improve the picture. * Try tuning to another channel in case there's a problem with the current station. * Move the TV to a different spot to rule out interference from other devices.
What to do if teletext is impaired or absent on Grundig 32 VLE 7321 WL?
If Teletext is not working properly on your Grundig LCD TV, consider these solutions: try switching to a different channel in case there's a problem at the station, try fine tuning or check your antenna if the station signal is too weak or the television channel has no teletext.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| VGA Port | Yes |
| Headphone Jack | Yes |
| Energy Class | A |
| Backlight Technology | LED |
| Power Consumption | 45W |
| Standby Power Consumption | 0.5W |
Important guidelines for safe installation and operation of the television.
Overview of digital channel reception, electronic TV guide, and media playback.
Requirements for receiving DVB-S, DVB-T, and DVB-C digital channels.
Guidance on energy saving and responsible disposal of the television.
Advice on preventing screen burn-in from static images.
Instructions for connecting TV to antenna and power sources.
Steps for inserting batteries into the remote control.
Diagram and explanation of all external connection sockets on the TV.
Explanation of buttons on the television set itself.
Detailed breakdown of remote control buttons and their operations.
Information on using the GRUNDIG Voice Remote.
Guide to the initial setup process and tuning television channels.
How to set language, country, and operating mode for the TV.
Steps for tuning satellite TV channels, including easy and advanced methods.
Procedures for tuning terrestrial (DVB-T) and cable (DVB-C) channels.
How to change, delete, and organize digital TV channels.
Steps to create and manage favourite channel lists.
Instructions for removing unwanted TV channels from the program table.
How to reorder channels within the program table for satellite channels.
Methods for sorting channels in the program table by different criteria.
Marking channels to be skipped during channel selection.
Steps to create and save up to four lists of favourite channels.
How to change the order of channels within a selected favourite list.
Procedure to enter custom names for favourite channel lists.
Adjusting picture modes, brightness, contrast, sharpness, and colour.
Configuring volume, balance, sound modes, and audio output.
Function to maintain consistent volume across channels.
Selecting audio channels for stereo, dual, or mono sound.
Prevents sudden volume fluctuations and increases.
Adjusting stereo width and selecting preset sound effects.
Utilizing SRS StudioSound HD for surround sound effects.
Adjusting audio frequencies using the equalizer function.
Enabling audio descriptions for visually impaired users.
Switching TV on/off, selecting channels, adjusting volume, and muting.
Accessing channel info and pausing the current program.
Selecting and adjusting various picture modes and parameters.
Configuring audio language, subtitles, zoom, and eco mode.
Setting the TV to automatically switch off after a specified time.
Function to switch between saved channels in memory.
Accessing program information and schedules for digital channels.
Options for adjusting the aspect ratio of displayed images.
Guide to connecting the TV to a network via Ethernet cable.
Information on establishing wired or wireless network connections.
Automatic configuration for wired network connection via DSL modem.
Manual configuration for wired network connection with static IP.
Steps to connect the TV to a wireless network using a USB dongle.
Options for automatic or manual wireless network configuration.
Automatic configuration for wireless network connection.
Manual configuration for wireless network connection with static IP.
Introduction to the Smart Inter@ctive TV 2.0 platform and its applications.
Steps to open and navigate the Smart Inter@ctive TV menu.
Guide for registering and creating a GRUNDIG SMART APPS account.
Procedure to log in to the GRUNDIG Application Store.
Browsing categories and downloading applications from the online store.
Process for downloading and installing applications from the online store.
Removing installed applications from the TV.
Changing the order of installed applications.
Providing ratings for installed applications.
Selecting different display modes while using applications.
Navigating the main menu of the application browser.
Controls for playing media within applications.
Introduction to using Skype for video and audio calls via the TV.
Connecting and setting up the Skype camera for use with the TV.
Step-by-step guide to creating a new Skype account.
Adding contacts to the Skype address book on the TV.
Instructions for making audio and video calls via Skype.
How to make paid calls to phone numbers using Skype Credit.
Changing and understanding Skype presence status symbols.
Accessing call history, options, and updating the Skype application.
Information on using the BABYWATCH application for child monitoring.
Accessing and playing media files from a home network using DLNA.
How to choose and connect to a Digital Media Server on the network.
Initiating playback of selected media files.
Controls for pausing, stopping, and navigating media playback.
List of video, audio, and image file formats compatible with the TV's USB port.
Instructions for safely connecting and removing USB storage devices.
Procedure for safely disconnecting USB devices to prevent data loss.
Navigating files, managing USB settings, and slideshow options.
Information on accessing and playing DivX Video-on-Demand content.
Controls for playing video, audio, and image files from USB.
Extended playback controls like chapter selection and subtitles.
Navigating tracks/pictures and adjusting playback speed.
Options for rotating images and setting repeat playback modes.
How to use TOP text, Normal text, and navigate teletext pages.
Features like character height adjustment, page hold, and split screen.
Explanation of the Hybrid Broadcast Broadband TV service.
How to activate and use HbbTV features and navigate its content.
Basic playback controls for video content within HbbTV.
Accessing settings and changing languages for menu, audio, and subtitles.
Configuring automatic/manual date/time and time zones.
Setting the TV to automatically switch off or on after a specified time.
Setting the TV to automatically switch to standby after inactivity.
Setting up parental guidance, PIN codes, and locking content.
Restricting access to TV menus by requiring a PIN code.
Disabling TV buttons using a parental lock feature.
Procedure to set a personal PIN code instead of the default.
Restricting access to specific TV channels using a PIN code.
How to view a TV channel that has been locked with a PIN.
Adjusting the brightness of the TV's standby LED.
Updating TV software automatically via satellite or internet.
Resetting the TV to its original factory settings.
How DIGI LINK (CEC) enables control of connected devices via TV remote.
Finding and configuring connected devices for DIGI LINK operation.
Deciding if external devices react to the TV's remote control.
Option to switch connected external devices to standby mode.
Connecting sources for viewing digital HDTV programs.
Details on connecting devices via HDMI, SCART, Component, and S-Video.
Connecting devices using HDMI and SCART for digital audio/video.
Connecting devices using Component and S-Video for analogue signals.
Enabling analogue video/audio signals from a connected decoder.
Connecting devices using RCA cables for analogue TV signals.
Connecting common external devices like DVD players and set-top boxes.
Connecting headphones and adjusting their volume.
Connecting digital audio equipment like amplifiers and AV receivers.
Applying and activating the HDMI ARC function for audio return.
Outputting TV audio through connected Hi-Fi systems or AV receivers.
Connecting a computer using VGA and audio cables.
Configuring display settings for optimal PC monitor operation.
Inserting and accessing CA modules for encrypted channels.
Managing access to PAY-TV provider channels via the CI module.
Performing an automatic search for new satellite TV channels.
Manually searching for satellite TV channels using specific parameters.
Adjusting LNB power, type, and satellite parameters.
Configuring the TV to operate motorised satellite antennas.
Fine-tuning satellite antenna alignment using DiSEqC 1.2.
Performing an automatic search for channels from a cable provider.
Manually searching for cable TV channels using specific frequencies.
Performing an automatic search for digital terrestrial TV channels.
Enabling automatic updates for network operator changes.
Manually searching for digital terrestrial TV channels by channel number.
Tuning analogue channels by scanning or manual entry.
Configuring all analogue TV channels in the channel list.
Manually tuning TV channels by entering their specific numbers.
Modifying analogue channels, including deletion and renaming.
Instructions for removing unwanted TV channels from the program table.
Assigning custom names to TV channels.
Marking channels to be skipped during sequential channel selection.
Steps to create and save up to four lists of favourite channels.
Viewing signal quality and strength for digital channels.
Options to disable or enable the HbbTV interactive service.
Options to disable or enable digital teletext functionality.
Technical details including screen size, power, reception ranges, and dimensions.
Notes on audio output, LNB, DiSEqC, weight, and dimensions.
Specifications for satellite, cable, and terrestrial digital signal reception.
Frequency ranges for analogue TV signal reception.
Number of preset channels for different reception types.
Physical specifications of the television set.
EU directives and regulations compliance information for dealers.
Notes on recyclable packaging and environmental recycling process.
Information on product materials and responsible disposal for recycling.
Common problems, their causes, and suggested remedies for TV operation.
To Next Page
