Why is my Grundig 32 VLE 4500 BM showing a picture but no sound?
If your Grundig TV shows a picture but there is no sound, the volume might be set to the minimum. Try turning up the volume or switching it on.
What to do if the Grundig TV remote control does not work?
If the remote control for your Grundig TV isn't working, make sure there's no obstacle between the remote and the TV. Point the remote control directly at the television. Also, check the batteries and replace them if needed. As a last resort, switch off the television at the mains switch for two minutes.
How to fix insufficient contrast on Grundig 32 VLE 4500 BM?
If you're experiencing insufficient contrast on your Grundig TV, the picture settings might not be correct. Adjust the brightness, contrast, or color settings to improve the picture quality. Alternatively, the problem may be at the station, so try another channel.
How to fix Grundig 32 VLE 4500 BM TV with screen lit but no station visible?
If your Grundig TV screen is lit with snow but no station is visible, check if the antenna cable is properly connected. If it is, try starting a channel scan, as no TV channel may be tuned.
Why is there no color on my Grundig 32 VLE 4500 BM TV?
If there's no color on your Grundig TV, the color intensity might be too low. Try turning up the color. If available, select the correct color standard in the TV settings. As an alternative, the problem might be at the station, so try a different channel.
What causes ghosting reflection on Grundig 32 VLE 4500 BM TV?
Ghosting or reflection on your Grundig TV can be due to the channel setting. Try automatic or manual tuning/fine tuning. It could also be an antenna issue, so have the antenna cable or system checked.
Why is teletext impaired or absent on my Grundig TV?
If teletext is impaired or absent on your Grundig TV, the problem might be at the station, so try a different channel. It could also be due to the television channel itself (if it doesn't offer teletext) or the antenna system. Try a different TV channel and carry out fine tuning. Another possible cause is a weak station signal, so check the antenna.
How to fix a Grundig TV picture that is too dark in PC mode?
If the picture is too dark in PC mode on your Grundig TV, it's likely due to an incorrect setting for picture resolution and picture frequency on the PC. Change the settings on the PC (e.g., to 1280 x 768 resolution with a refresh rate of 60 Hz).
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 pixels |
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Digital TV Standard | DVB-T/C/S2 |
| Refresh Rate | 200 Hz PPR |
| Built-in Wi-Fi | No |
| Energy Efficiency Class | A+ |
| Display Resolution | HD |
| Backlight Technology | LED |
To Next Page