Why is my Grundig LCD TV remote control not working?
If your Grundig LCD TV remote control isn't working, there might be a few reasons. First, ensure there's nothing blocking the path between the remote and the TV; point the remote directly at the television. Second, check the batteries and replace them if needed. Finally, try switching off the television at the mains switch for two minutes to reset the operating mode.
What to do if my Grundig LCD TV has a picture but no sound?
If your Grundig LCD TV shows a picture but has no sound, the volume might be set too low. Try turning up the volume or switching it on.
How to fix insufficient contrast in my Grundig LCD TV picture?
To fix insufficient contrast in your Grundig LCD TV picture, first adjust the brightness, contrast, or color settings. If that doesn't work, the problem might be with the broadcast; try switching to another channel.
What to do if my Grundig LCD TV screen is lit but no station is visible?
If your Grundig LCD TV screen is lit but no station is visible, check if the antenna cable is connected properly. If it is, try starting a channel scan to tune in available channels.
What causes ghosting or reflection on my Grundig LCD TV and how to fix it?
Ghosting or reflections on your Grundig LCD TV can be due to the channel setting or antenna issues. Try automatic or manual tuning/fine tuning. Also, have your antenna cable or system checked.
What to do if my Grundig LCD TV teletext is impaired or absent?
If the teletext on your Grundig LCD TV is impaired or absent: * The issue might be with the station, so try a different channel. * It could be a problem with the television channel (no teletext) or antenna system, so try a different TV channel and carry out fine tuning. * The station signal might be too weak, so check your antenna.
How to fix a too dark picture in PC mode on my Grundig LCD TV?
If the picture is too dark in PC mode on your Grundig LCD TV, the picture resolution and picture frequency on the PC may be set incorrectly. Change the settings on the PC (e.g., to 1280 x 768 resolution with a refresh rate of 60 Hz).
General| Display resolution | 1366 x 768 pixels |
|---|---|
| Screen shape | Flat |
| Native aspect ratio | 16:9 |
| Response time | 8 ms |
| Comb filter | 3D |
| Smart TV | Yes |
| Number of speakers | 2 |
| USB 2.0 ports quantity | 1 |
| Component video (YPbPr/YCbCr) in | 1 |
| Common interface (CI) | Yes |
| Common interface Plus (CI+) | Yes |
| SCART ports quantity | 1 |
| Ethernet LAN | Yes |
| VESA mounting | Yes |
| VESA mounting interfaces | 200 x 200 mm |
| Product colour | Black |
| Refresh Rate | 50 Hz |
| Built-in Wi-Fi | Yes |
| Energy Efficiency Class | A |
| Display diagonal | 81.3 cm (32") |
| Viewing angle, horizontal | 178° |
| Viewing angle, vertical | 178° |
| Digital signal format system | DVB-C, DVB-S2, DVB-T |
Instructions for connecting the TV to antenna and power sources for operation.
Diagram and explanation of all input/output ports on the TV for external devices.
Explanation of the primary buttons and their functions on the TV remote control.
Guide to tuning, searching, and organizing TV channels automatically and manually.
Adjusting visual parameters like brightness, contrast, and color for optimal viewing experience.
Configuring audio parameters such as volume, balance, and sound modes for clear audio.
Steps to safely connect USB storage devices like flash drives or hard disks to the TV.
Playing, pausing, resuming, and stopping audio and video files from USB storage.
Features for locking channels, menus, and managing PIN codes for child safety.
Resetting the TV to factory defaults, clearing all custom settings and channel lists.
Connecting devices via HDMI for high-quality digital audio and video signals.
Steps for connecting a personal computer to the TV for use as a monitor via VGA.
Common issues and solutions for TV operation, including picture, sound, and remote control problems.
To Next Page
