What to do if the remote control does not work on my Grundig TV?
If the remote control for your Grundig TV isn't working, first, make sure you are pointing the remote directly at the television. Then, check the batteries and replace them if needed. As a last resort, try switching off the TV with the main power button for about 2 minutes.
Why is my Grundig 32 VLE 4820 screen snowy but has no channels?
If your Grundig TV screen is showing snow but you're not getting any channels, the issue could be due to several reasons. First, check if the antenna cable is properly connected. If it is, try starting the channel search function on your TV. Also, review your picture settings (brightness, contrast, color) and adjust them as needed. Test with a different channel. Finally, it might be interference from other devices, so try changing the position of the device.
What to do if Teletext is not working or faulty on my Grundig 32 VLE 4820?
If Teletext is not working correctly on your Grundig TV, try testing with a different channel. The problem may also be with the television station (if it has no teletext) or antenna system. Also, check the antenna system in case the station signal is too weak.
To Next Page
General