17
ENGLISH
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Initial set-up and tuning
channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S/S2), terrestrial channels (DVB-
T), cable channels (DVB-C) and analogue chan-
nels.
You start the search and the channels will be
stored into the different Program Tables. Follow-
ing, you can sort the channels in the Program
Tables.
The various settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
DVB-S/S2 – Tunes digital channels from the
satellite, from page 18.
You have two options for this search:
–
the basic installation which presets a stan-
dard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
–
the professional installation, which allows
you to make all required settings and set
parameters for your receiver system.
7
DVB-T – Tunes digital terrestrial channels, on
page 20.
7
DVB-C – Tunes digital channels from the
cable provider, on page 20.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 70.
7
Further settings for digital channels after the
initial set-up can also be found in the chapter
“Special Settings”, starting on page 61.
Note:
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
Selecting language, operating
mode and country
1 Switch on the television set from standby
with »
8«, »1…0« or »P+« or »P-«.
–
During initial set-up, the »Installation
Guide« will be displayed.
Help:
7
If this menu is not displayed, restore the
television set to its default settings (see
page 54).
2 Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »OK« to confirm.
3 Select the mode with »
<
« or »
>
« and press
»OK« to confirm.
– The settings used in »Home Mode« help
to save energy.
–
Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Note:
7
End the »Shop Mode« by restoring the
television set to its default settings (see
page 54).
4 Select the country in which the television
set is operated with »
<
«, »
>
«, »
V
« or »
Λ
«
and press »OK« to confirm.
– The »Source Setup« menu appears with
the »Connection Type« line marked.
Note:
7
You can find a description of how to tune
the channels of your choice – depending
on the antenna connected – in the follow-
ing chapters.
To Next Page
Loading...
Need help?
General