Grundig CMS 3000 BT DAB+ - BLUETOOTH CONNECTION; Device Compatibility and Pairing; Bluetooth Playback Control

33
ENGLISH
BLUETOOTH MODE
---------------------------------------------------------------------------------------------------
Activating a Bluetooth auxiliary
device that is logged on
Notes:
7
You only have to log Bluetooth auxiliary de-
vices on once.
7
When the Bluetooth auxiliary device leaves
and then moves back into signal range of
the Micro HiFi System the auxiliary device
logs on automatically.
7
The Micro HiFi System automatically cony-
nects to the last Bluetooth auxiliary device
that was logged on.
7
If the Bluetooth auxiliary device is not recog-
nised, it has to be activated again via its own
menu.
Playback from the Bluetooth
auxiliary device
1 Start playback on the Bluetooth auxiliary de-
vice.
2 Set the preferred volume with the control knob
on the hi-fi system or press »– VOL +« on the
remote control
3 End playback on the Bluetooth auxiliary de-
vice.
Notes:
7
Various functions can also be con-
trolled on the Micro HiFi System
Press »eII« to pause playback,
press »eII« again to resume playback;
press »
3
« to select the previous
track and »4 « for the next track.
7
Note that the data transmission range can
be as much as 9 m, depending on the Blue-
tooth device that is used and the structure of
the building.
Logging out the Bluetooth auxiliary
device
1 Log out the Bluetooth device.
– The display changes to »NO BT«.
Logging the Bluetooth device back
on
Compatible with the following
devices
Your Micro HiFi System can be connected to any
commercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs,
for example.
Selecting the Bluetooth input
source
1 Select the Bluetooth input source by pressing
» « on the device or » « on the remote
control.
– Display: »BT«.
Finding and connecting a
Bluetooth auxiliary device
1 Activate the Bluetooth function on the Blue-
tooth auxiliary device.
2 Start the search function on the Bluetooth aux-
iliary device.
– After a short time, your Grundig connected
Hifi System will be displayed on the Bluetooth
auxiliary device.
3 Select the Grundig connected Hifi System on
the Bluetooth auxiliary device and connect to
it.
4 When the Bluetooth auxiliary device is con-
nected to your device, »BT« is displayed on
the Micro HiFi System
Note:
7
Your Micro HiFi System can only receive
and play the audio signal from one Blue-
tooth device; however, up to 8 Bluetooth
auxiliary devices can be logged on.