ENGLISH
18
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
T
If the network name (SSID) is suppressed
on the WLAN router for security reasons,
the network cannot be found. It must then
be entered manually. Select the option
»[Manual config]« with »
V
« or »
Λ
« or by
turning the Jog-Shuttle and press »OK« to
confirm. Continue with the chapter “Special
Settings” – “Registering the device ...” (see
"Long manual").
10 Select your wireless [WPS] network with
» « or » « or by turning the Jog-Shuttle and
press »OK« to confirm.
Note:
T
There are two options for logging on to a
[WPS] network: using the push button on the
router or by entering a PIN on the router.
11 S elect the option »Push-Button« with» « or
» « or by turning the Jog-Shuttle and press
»OK« to confirm.
Activate the »Push Button« function on the
router (menu or button) and press »OK« on
the device within 2 minutes.
– Display: »Please wait, connecting« and
then »Connected«.
End setting with »OK« on the device;
or
12 S elect the option »PIN« with » « or » « or
by turning the Jog-Shuttle and press »OK« to
confirm.
– Display: PIN number that specifies the de-
vice.
Enter the PIN number in the router menu and
confirm.
– Display: »Please wait, connecting« and then
»Connected«.
13 Select your wireless network (SSID) with
» « or » « or by turning the Jog-Shuttle and
press »OK« to confirm.
– Key menu opens, the cursor is positioned in
the first input position.
Time/Date
Key:
0123456789
abcdefghijklmn
opqrstuvyzABCD
DEFGHIJKLMNOPQR
BKSP
OK
CANCEL
Note:
T
If the network is encrypted, the network key
(security code WEP or WPA) must be en-
tered.
14 Enter your wireless security code:
Select the first character (capital and small
letters, numbers, symbols) with » «, » «, » «
or » « or by turning the Jog-Shuttle and press
»OK« to confirm.
Repeat the procedure for all characters.
After you finish entering all characters, select
the push button »OK« with » «, » «, » « or
» « or by turning the Jog-Shuttle and press
»OK« to confirm.
– The menu »Internet Setup« appears, the
network registration is processed.
– Display: »Please wait, connecting« and
then »Connected«.
– After successful registration, the message
»Setup wizard completed« appears.
Notes:
T
You can choose between numbers, lower and
upper case letters, and special characters.
T
Press » « or » « or by turning the Jog-Shut-
tle to scroll through the menu pages (num-
bers, letters, special characters, etc.).
T
If you make a mistake during entry, press
» «, » «, » « or » « or by turning the Jog-
Shuttle to select the push button »BKSP« and
press »OK« to confirm. The last character
is deleted.
T
If you wish to exit the menu prematurely,
press » «, » «, » « or » « or by turning
the Jog-Shuttle to select the push button
»CANCEL« and press »OK« to confirm.
15 Press »OK« to end the setting.
To Next Page
Loading...
