ENGLISH
17
WALL MOUNTING
-----------------------------------------------------------------------------------------------------
In order to prevent injuries,the sound base device
must be securely fasten to the wall in accordance
with the below installation instructions.
Caution:
7
The ground must be firm and capable of han-
dling the load.
7
Use mountings that are appropriate for the
weight of the device.
7
For wooden or hollow wall structures use suit-
able plugs and screws. Seek advice from a
specialist dealer.
Warning:
7
In order to prevent injuries, the device must
be securely fastened to the wall in accord-
ance with the installation instructions.
Note:
7
Installation of the Soundbar GSB 900 for
professional use (e.g. in a bistro) must only
be carried out by an electrically qualified
person, in accordance with the applicable
construction regulations as per VDE 0100.
1 Drill the two holes(about 6mm diameter ) in the
wall and keep the distance between drill holes
of the sound base is 500mm.
50 0mm
2 Insert the two plugs supplied into two
drilled holes and then insert two screws
supplied into two holes and tighten.
3 Take care to leave 4 mm between the screw
heads and wall.
4mm
4 Insert the wall-mounting bracket sup-
plied into the pedestal of the sound base.
5 Use the bracket screws supplied to insert the
wall-mounting bracket hole and tighten.
To Next Page
Loading...
