20
ENGLISH
OPERATION
------------------------------------------------------------------------------------------------------------------------------
Remote control operation
1 Insert the batteries into the remote control.
2 Point the remote control at the remote sensor on
the front panel.
3 The sound base is in searching bluetooth signa
status.
4 The remote control works within a distance of
about 8 metres from the sensor and within an
angle of about 30 degrees from the left and
right side.
Battery installation
1 Remove the battery compartment cover on the
back of the remote control.
2 Load one AAA/1.5V battery into the battery
compartment making sure that the battery have
been inserted with the correct polarities match-
ing the symbols +, - as indicated inside the bat-
tery compartment.
3 Replace the cover.
Note:
7
Remove the battery when you do not intend
to use the remote control for a long time.
7
Weak batteries can leak and severely dam-
age the remote control.
7
The battery must not be exposed to exces-
sive heat source, such as sunshine, fire or any
other things like that.
7
Be environmentally friendly and dispose of
batteries according to your government reg-
ulations.
To Next Page
Loading...
