EasyManua.ls Logo

Grundig DTR 6000 - Bluetooth Device Pairing and Connection; Audio Playback and Disconnection

Grundig DTR 6000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
ENGLISH
BLUETOOTH MODE
---------------------------------------------------------------------------------------------------
Bluetooth device compatibility
Your DTR 6000 2.1 BT DAB+ WEB, TR 3350 BT
DAB+ WEB, TR 3350 BT DAB+ WEB connects
with all Bluetooth devices that support the A2DP
profile including the most smartphones, laptops
and tablets.
Selecting the input source Bluetooth
1 To enter Bluetooth Audio mode, either press
and hold »Menu/INFO« button on the device
--> select »Main Menu« --> Bluetooth or press
»MENU« button on remote control and apply
same procedure as above.
Display: Bluetooth icon flashing on the bot-
tom right corner of the display.
Pairing Bluetooth device
1 Activate on the Bluetooth device the Bluetooth
function.
2 Start on the Bluetooth device the search func-
tion.
After a short period of time, your Grundig
DTR6000, TR3350 is displayed on the Blue-
tooth device.
3 Select the Grundig DTR6000, TR3350 on the
Bluetooth device and connect it.
4 Once the Bluetooth device is connected to your
device, the BT icon becomes steady.
Note:
7
Although the DTR 6000 2.1 BT DAB+ WEB,
TR 3350 BT DAB+ WEB, TR 3350 BT DAB+
WEB can only stream audio from one device
at a time, it is capable of being paired with
up to eight devices.
Connecting a paired Bluetooth
Device
Notes:
7
You will only need to pair your Bluetooth de-
vice with the unit one time.
7
The next time your Bluetooth device and the
DTR 6000 2.1 BT DAB+ WEB, TR 3350 BT
DAB+ WEB, TR 3350 BT DAB+ WEB are
in range of each other, and the Bluetooth
feature is turned on, they will automatically
connect.
7
The DTR 6000 2.1 BT DAB+ WEB, TR 3350
BT DAB+ WEB, TR 3350 BT DAB+ WEB will
only automatically connect to the last Bluetooth
Device it was connected to.
7
If your paired device does not automatically
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play Audio signal from your Blue-
tooth device
1 Start playback on the Bluetooth Device.
2 Adjust the volume using »
« or » « .
3 End playback on the Bluetooth Device.
Notes:
7
Various functions may also be controlled from
the DTR 6000 2.1 BT DAB+ WEB, TR 3350
BT DAB+ WEB, TR 3350 BT DAB+ WEB.
Select Playback-Pause using »
eII« , press
»
eII« again to resume playback; select pre-
vious title by pressing »
«, select next title
by pressing »
«.
7
Keep in mind that depending on the used
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
Disconnect the Bluetooth device
1 Switch off the Bluetooth function at
the Bluetooth device or long press
»PRESET/BT PAIR« button.
Display changes to: Flashing BT icon.

Table of Contents

Related product manuals