Grundig DTR 6000 - Special Functions

ENGLISH
44
Set the display illumination – for
the stand-by mode
You can choose whether the display is always
displayed on level in the stand-by mode or whet-
her it displayed dim level after a desired time (10,
20, 30, 45, 60, 90, 120 or 180 second).
1 Press and hold »Menu/INFO« on the device
to open the menu, select System Settings → Ba-
cklight.
2 Select the option »System settings«
with »
/ « and confirm by pressing »OK«.
3 Select the option »Backli
g
ht« with »
/ «
and confirm by pressing »OK«.
4 Select the desired option “On” or 10, 20, 30,
45, 60, 90, 120 or 180 second) with »
/ «
and confirm by pressing »OK«.
5 Press »Menu/INFO« to end the setting.
Note:
7
The display is illuminated after pressing any
button.
Call up the software version
1 Press and hold »Menu/INFO« on the device
or »Menu« on remote control to open the
menu.
2 Select the option »System settings«
with »
/ « and confirm by pressing »OK«.
3 Select the option »Info« with »
/ « and
confirm by pressing »OK«.
– Display: Actual software version. For more
information press »
/ «.
4 Press and hold »Menu/INFO« on the device
or »Menu« on remote control to end the dis-
play.
SPECIAL FUNCTIONS
--------------------------------------------------------------------------------------------
Deleting all settings (Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1 Open the menu with press and hold
»Menu/INFO«.
2 Select the option »System settings«
with »
/ « and confirm by pressing »OK«.
3 Select the option »Factor
y
reset« with
»
/ « and confirm by pressing »OK«.
– A safety confirmation is displayed.
4 Select the option »Yes« with »
r e«.
Note:
7
To cancel the function select the option »No«
by pressing »
r e«.
5 Press »OK« to confirm setting.
– Display: »Restartin
g
«.
Software Update
From time to time, software upgrades may be cre-
ated with bug fixes and/or additional features.
You can either check manually or set DTR 6000,
TR 3350 to check periodically automatically (this
is the default). If newer available software is dete-
cted, you will be asked if you want to go ahead
with an update. If you agree, the new software is
then downloaded and installed. After a software
upgrade, all user settings are maintained.
Note:
7
Before starting a software upgrade, ensure that
DTR 6000, TR 3350 is plugged into a stable
main power connection. Disconnecting power
during an upgrade may permanently damage
the unit.