OPERATING
------------------------------------------------------------------------------------------------------------------------------
Bluetooth function
Pairing Bluetooth device
1 Switch on the device by pressing »8«.
– The indicator »A« will start blinking blue.
– Now you can ready to pair your device with
the unit.
2 Activate the Bluetooth function on the auxiliary
Bluetooth device.
3 Start the search function on the auxiliary Blue-
tooth device.
– After a short time, the GSB 2000 will be dis-
played on the Bluetooth auxiliary device.
4 Select the GSB 2000 on the Bluetooth auxil-
iary device and connect to it.
5 When the Bluetooth auxiliary device connect-
ed to your device, a beep is emitted and the
»A« display lights up blue.
Note:
7
Although the unit can only stream audio
from one device at a time, it is capable of
being paired with up to eight devices.
Connecting a paired Bluetooth
Device
Notes:
7
You will only need to pair your Bluetooth
device with the unit one time.
7
The next time your Bluetooth device and the
unit are in range of each other, and the Blue-
tooth feature is turned on, they will automati-
cally connect.
7
The unit will only automatically connect to
the last Bluetooth Device it was connected
to.
7
If your paired device does not automatically
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play Audio signal from your Blue-
tooth device
1 Start playback on the auxiliary Bluetooth de-
vice.
2 Press »–« or »+« on the GSB 2000 to adjust
the volume.
3 Stop playback on the auxiliary Bluetooth de-
vice.
Notes:
7
Keep in mind that depending on the used
Bluetooth device and the structual condi-
tions the wireless range can be up to 9 m.
7
The volume controls on your Bluetooth de-
vice work separately from the volume con-
trols on the GSB 2000.
Disconnect the Bluetooth device
1 Switch off the Bluetooth function at the Blue-
tooth device.
– The indicator »A« will flash blue.
Reconnecting the Bluetooth device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2 To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the GSB 2000.
Note:
7
In case of the registered GSB 2000 can-
not connect to the Bluetooth device again,
please remove the GSB 2000 from the Blue-
tooth device list, search and connect again.
Out of Range or Lost Signal
If the Bluetooth device is out of range (beyond 9
m) of the unit or if there is something blocking the
Bluetooth signal, the indicator »A« will flash blue
to indicate that the Bluetooth connection with the
Bluetooth device has been lost.
To Next Page
Loading...
